Bonddex Pin Holes Repairing/ Grouting is specially designed for repairing air voids and thumb holes on the surface of concrete and cement-based terrazzo stones. It is a non-shrink, highly adhesive material.
﹒ Specifically used for filling holes on concrete surfaces.
﹒ Enhances the density of the concrete surface.
﹒ Prepares for polishing, providing a mirror-like finish.
﹒ Quick repair and can be polished after 4 or 12 hours, depending on the strength of the original surface.
﹒ The existing floor should be ground based on the strength of the concrete surface.
﹒ Clean the floor using a scrubbing machine, water jet, and industrial vacuum cleaner.
﹒ Wet the dry floor with clean water, but do not allow pooling of water.
﹒ To prevent the floor from becoming too dry, use ARC-76 resin water as a primer to avoid the loss of moisture from the Pin Holes Repairing/ Grouting, ensuring the best results.
﹒ Mix Bonddexx Pin Holes Repairing/ Grouting with water at a ratio of 1:0.5 and apply the mixture to the floor using a trowel in a consistent manner.
﹒ Adjust the amount of water according to the desired consistency based on the site conditions.
﹒ The use of G-2000 pinhole repairing solution can increase the efficiency and speed of repairing voids.
This product is in powder form designed for repairing air bubble holes and thumb-sized holes. For filling larger holes or voids, mix "邦得士" Pin Holes Repairing/ Grouting with ratio Materials : Sand = 1 : 1.5 and add an appropriate amount of water to achieve a viscous consistency before spreading over the holes.
﹒ This product is an early strength type and can be polished 4 hours to two days after construction, depending on the teprature.
﹒ After final setting, it needs to be cured with water 2-3 times or kept moist for 1 hour to enhance wear resistance.
﹒ Storage: Store in a cool, shaded place and avoid exposure to sunlight or moisture.
﹒ Package: 20kg/ bucket.